page_banner

sehlahisoa

Wego nale

Nale ea ho buoa ke sesebelisoa se sebelisetsoang ho suturing lisele tse fapaneng, ho sebelisa ntlha e bohale ho kenya lesela le khomaretsoeng ka har'a lesela ho tlatsa lesela.Nale ea suture e sebelisoa ho phunyeletsa lesela le ho beha li-sutures ho etsa hore leqeba / lekhalo le atamelane.Le hoja ho sa hlokahale hore ho be le nale ea suture nakong ea pholiso ea maqeba, ho khetha nale e nepahetseng ka ho fetisisa ea suture ke ea bohlokoa haholo ho netefatsa hore maqeba a fola le ho fokotsa tšenyo ea lisele.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Li-needle tsa ho buoa tsa WEGO bakeng sa suture e tloaelehileng li entsoe ke mechine e feletseng le mekhoa e tsoang ho US e nang le AlS1420 kapa AlSI470 alloy e entsoeng ka C / Si / Mn / P / S / Ni / Cr element joalo-joalo.Keletso e ntlafalitsoeng ea geometri e fana ka ts'ebetso e ikhethang ea ho kenella ka ho leka-lekana ka ho kobeha le ho ductility.Linale tsa li-suture tse khethehileng tse tsoang US/Europe/Japan li koahela linale tse nyane.E fumaneha bolelele ba nale ho tloha 3 limilimithara ho 90 limilimithara, lesoba bophara ho tloha 0.05 limilimithara ho 1.1 limilimithara, terata bophara ho tloha 0.14 limilimithara ho 1.6 limilimithara, tlas'a SKI nale, 1/4 selikalikoe, 1/2 selikalikoe, 3/8 selikalikoe, 5/8 selikalikoe, se kobeha se otlolohileng le se kopaneng.Likarolo tsa mantlha tsa linale tsa ho buoa tsa WEGO ke bohale bo phahameng bo bonoang ka sebopeho sa nale / ntlha, moralo le mokhoa oa ho roala silicone le ductility e phahameng ka lebaka la thepa ea thepa eo ho leng thata ho e senya.E le ho fihlela litlhoko tsa lingaka, re fana ka mefuta e mengata ea linale tse nang le mefuta e fetang 10,00 ea litlhaloso.Linale li arotsoe ka 'mele o pota-potileng, ho itšeha, ho itšeha ka morao, ho itšeha ka morao, ntlha e hlabang, ho seha taper, trocar, calcified coronary, daemane le linale tsa spatula.

Wego Needle
Wego Needle

WEGO NALE KHOUTU LE BOELAO

Wego Needle

TA-Taper Point / 'Mele o chitja;RC-Reverse Cutting;CU-Conventional Cutting;Ntlha ea BL-Blunt;TC-Taper Cutting;P-Premium Reverse seha;PC-Premium Cutting;

Nale Curve: 1/2 selikalikoe-170;3/8 selikalikoe-135;5/8 selikalikoe-225;otlolohileng-000

Bolelele ba nale: Yuniti ke mm le linomoro tse 2.Joalo ka 40 ke 40 mm.

Hole/Wire Diameter: Yuniti ke 0.01 mm le linomoro tse 2 kapa tse 3.Joalo ka 40 ke 0.4 mm/100 ke 1 mm.

Mohlala: TA170162551AS ke Taper point, 1/2 selikalikoe, 16 mm bolelele, lesoba bophara 0.25 limilimithara, terata bophara ke 0.51 limilimithara, tšepe e sa hloekang ke 420 letoto le silicon barbotage.

WEGO NEEDLE MOLEMO OA MOSEBETSI

1.Ho Chesa holimo
Ka moralo o ikhethileng oa sebopeho sa nale, kalafo e ikhethang ea ho roala le theknoloji e tsoetseng pele ea ho phunya, lesela le bonolo le kenngoe ka tšenyo e nyane mme lesela le thata le sutured ka matla a matla a ho kenella.

2.High Durability
Kalafo e ikhethang ea ho roala e tiisa ho tšoarella ha linale 'me nale e ke ke ea e-ba lerootho ka mor'a ho roka khafetsa.

Joalo ka ha ho bonts'itsoe setšoantšong, ha ho bapisoa le data ea nale e tšoanang kamora liteko tse 10 tsa ho kenella, phapang ea matla a ho kenella e nyane haholo.

 

Wego Needle

3.Good Fabricability
Karolo ea lesoba la nale e bohareng, boholo bo lekana, ka mor'a phekolo e khethehileng, ts'ebetso ea ho hokahanya ha nale le khoele e bonolo 'me matla a ho hokahanya a phahame.

4.Various Customized Models
Mefuta e mengata e hlophisitsoeng e ka fihlela litlhoko tse fapaneng tsa bongaka, 'me mohlala o mong le o mong o ka hlahisoa ka bongata.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona